주요 콘텐츠로 건너뛰기

iPhone 5sのフロントパネルアセンブリの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 32개에 영향을 미칩니다.

1 단계 번역중

1 단계
iPhone 5s Front Panel Assembly Replacement, Removing the Pentalobe screws: 0 단계, 이미지 1개 중 1개
Removing the Pentalobe screws
  • Before you proceed, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 3.9 mm Pentalobe screws from either side of Lightning connector.

iPhoneのバッテリー残量を25%以下まで消費された状態で作業を始めましょう。充電されたリチウムイオンバッテリーはダメージを与えると引火したり爆発する恐れがあります。

作業を始める前にiPhoneの電源を必ず切ってください。

Lightning コネクターの両側にある3.9 mmのペンタローブネジを2本外します。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.