주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 9개에 영향을 미칩니다.

13 단계 번역 중

13 단계
Now that the lower edge of the board is free from the outer case, rotate the logic board toward yourself to expose its rear face. The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components.
  • Now that the lower edge of the board is free from the outer case, rotate the logic board toward yourself to expose its rear face.

  • The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components.

  • Carefully pull the optical drive connector away from its socket on the logic board.

  • Pull the connector perpendicular to the face of the logic board.

ボードの下側端がアウターケースから外れます。ロジックボードを自分の方に向けて回転させて背面を露出させます。

次のコネクタはそのソケットにくっついてしまう傾向があります。 その場合は、コネクタとそのソケットの間の隙間に金属スパッジャーを挿入します。 スパッジャーをひねりながら、この2つを離します。

光学ドライブコネクタをロジックボードのソケットから慎重に引き抜きます。

ロジックボードの面に対して垂直にコネクタを引きます。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.