주요 콘텐츠로 건너뛰기
영어
스페인어
5 단계
To remove the relay board, remove the connector marked in blue and screw circled in purple. Lift up on the card.
  • To remove the relay board, remove the connector marked in blue and screw circled in purple.

  • Lift up on the card.

  • Detach the cable marked in green and remove the relay card from the device. Note, do not try remove this cable from the card the other end is soldered onto the board.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.