주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

11 단계 번역 중

11 단계
Use the spudger to lift the screen from the front panel. Place the spudger in the space directly left of the D-pad. The screen and the front panel is connected by a black tape that could rip if not removed carefully. You can use an iOpener or a hair dryer on the other side of the front panel in order to soften the black tape.
  • Use the spudger to lift the screen from the front panel. Place the spudger in the space directly left of the D-pad.

  • The screen and the front panel is connected by a black tape that could rip if not removed carefully.

  • You can use an iOpener or a hair dryer on the other side of the front panel in order to soften the black tape.

Hebe das LCD mit einem Spudger aus dem Vorderteil. Setze den Spudger direkt in den Spalt links vom Steuerkreuz.

Der Bildschirm und das Vorderteil sind mit einem schwarzen Band verklebt. Du musst es sorgfältig entfernen sonst reißt es.

[* black] Use the spudger to lift the screen from the front panel. Place the spudger in the space directly left of the D-pad.
[* icon_caution] The screen and the front panel is connected by a black tape that could rip if not removed carefully.
+[* icon_note] You can use an iOpener or a hair dryer on the other side of the front panel in order to soften the black tape.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.