주요 콘텐츠로 건너뛰기

iBook G4 14" 933 MHz-1.33 GHz Top Shield Replacement

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 18 안내서에 영향을 미칩니다.

1 단계 번역중

1 단계
iBook G4 14" 933 MHz-1.33 GHz Top Shield Replacement: 0 단계, 이미지 1개 중 1개
  • The screw circled in orange may not be present in some models.

  • Remove the following 16 screws:

  • Thirteen 3 mm Phillips.

  • One 3 mm Phillips. (actual screw not present in image)

  • Two 4 mm Phillips.

  • Be sure to fit the screw near the left hinge through the loop in the display data cable, securing the cable to the upper case.

  • Missing in this photo is the Bluetooth antenna present in some iBooks. It is located at the upper right corner of the battery compartment, just above the 4mm screw. You can see the bracket for the antenna in the photo. It is the two I-shaped holes just above the 4mm screw that must be removed in this step. To remove the antenna, slide it toward the LCD, and tilt it vertically back towards yourself.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.