주요 콘텐츠로 건너뛰기
영어
이탈리아어
2 단계
Unfasten 3 Phillips screws revealed beneath the heat sink on the CPU board. Carefully remove the CPU board from the Mother Board.
  • Unfasten 3 Phillips screws revealed beneath the heat sink on the CPU board.

  • Carefully remove the CPU board from the Mother Board.

  • Remove the barrell nut screws from the Mother Board which held the CPU board.

  • Unfasten 3 Phillips #1 screws on Mother Board as shown in illustration 1.

  • Slide the logic board about a quarter of an inch to free it from the three retaining pins.

  • Pull upwards and outwards to fully remove the logic board.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.