주요 콘텐츠로 건너뛰기
영어
이탈리아어

1 단계 번역 중

1 단계
Removing the metal backplate is simple.  This is just stuck on with some flexible glue. So prise something under and off it pops. Inside you can see a number of large cut outs in the rear of the plastic casing.
  • Removing the metal backplate is simple. This is just stuck on with some flexible glue. So prise something under and off it pops.

  • Inside you can see a number of large cut outs in the rear of the plastic casing.

  • Note the small pinhole in the metal backplate that aligns with the rubber sealed hole in the plastic casing - more on that later.

  • There is also a very small ground out area inside the metal backplate that appears to align with the rotating mass of the vibrator.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.