기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

안내서로 돌아가기
영어
일본어
6 단계
Remove the following screws from the logic board:

  • Remove the following screws from the logic board:

  • One 2.4 mm Phillips #000 screw

  • This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to this step to remove it.

  • Two 2.3 mm Phillips #000 screws

  • Four 2.8 mm standoff screws

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

ロジックボードから次のネジを外します。

2.4 mm #000プラスネジー1本

このネジはロジックボード底のメタル接合部分も同時に留めています。プラスブラケットの下に収まっていますが、これが外れている場合は、この手順を参照して取り外してください。

2.3 mm #000プラスネジー2本

2.8 mmスタンドオフネジー4本

スタンドオフネジを外すには、iPhone用スタンドオフドライバービットとドライバーハンドルを使うのが最適です。

困ったときには、小サイズのマイナスドライバーも役に立ちます。ただし、滑って周囲のコンポーネントにダメージを与えないよう細心の注意を払ってください。

[* black] Remove the following screws from the logic board:
[* red] One 2.4 mm Phillips #000 screw
[* icon_reminder] This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to [guide|20246|this step|stepid=72613|new_window=true] to remove it.
[* orange] Two 2.3 mm Phillips #000 screws
[* yellow] Four 2.8 mm standoff screws
[* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.