주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
스페인어

10 단계 번역 중

10 단계
Join both white cable wires and solder them together. Remember that the white wire from the AC adapter NEEDS to be soldered to the white wire from the cable that comes from the MacBook connector. The black insulated cover tube on the cable is to isolate the cable later, you can use heat to shrink it.
  • Join both white cable wires and solder them together.

  • Remember that the white wire from the AC adapter NEEDS to be soldered to the white wire from the cable that comes from the MacBook connector.

  • The black insulated cover tube on the cable is to isolate the cable later, you can use heat to shrink it.

  • The last pic shows the black insulated cover tube, you can cut it up to fit the length you need.

  • It is very important to isolate both wires, they cannot touch each other or else they will short circuit (in other words: Kaboom!).

Une los dos cables blancos y comienza a soldarlos.

Recuerda que el cable blanco del adaptador de corriente DEBE de ser soldado con el cable blanco que viene del conector de la MacBook.

El tubo termorretráctil en el cable es para aislar el cable más tarde, puedes usar calor para encogerlo.

La última foto muestra el tubo termorretráctil, puedes cortarlo al tamaño que necesites.

Es muy importante aislar los cables, no se pueden tocar entre sí o causarán un cortocircuito (en otras palabras: ¡Kaboom!)

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.