주요 콘텐츠로 건너뛰기

6 단계 번역 중

6 단계
Now re-install the caliper. Make sure to put blue thread locker on the caliper bolts. Torque the caliper bolts down to 115 nm / 85 lb-ft Torque the caliper bolts down to 115 nm / 85 lb-ft
Re-install the caliper
  • Now re-install the caliper. Make sure to put blue thread locker on the caliper bolts.

  • Torque the caliper bolts down to 115 nm / 85 lb-ft

Baue nun die Bremszange wieder ein. Sichere die Schrauben der Bremszange mit blauer Gewindesicherung.

Ziehe die Schrauben mit einem Drehmoment von 115 Nm an.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.