주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 9개에 영향을 미칩니다.

영어
프랑스어

3 단계 번역 중

3 단계
Wedge a plastic opening tool into the case-splittings and pull down to crack open the casing near the following buttons: Share button Options button
  • Wedge a plastic opening tool into the case-splittings and pull down to crack open the casing near the following buttons:

  • Share button

  • Options button

  • Split the plastic covers of the controller apart, taking note that they will still be attached by circuit board ribbons.

  • Three small pieces are often released from the framework. To prevent loss, maintain a controlled work field.

  • 2 Trigger Springs

  • 1 Grey Reset Button Extension

Pour ouvrir la manette, insérez un outil en plastique et appuyez dessus au niveau des boutons suivants :

Le bouton Share

Le bouton Options

Séparez les deux parties de la coque de la manette. N'oubliez pas que ces deux ensembles sont encore maintenus par les nappes de connexion des cartes électroniques!

Trois pièces se détachent souvent de la manette. Pour éviter de les perdre, maintenez un espace de travail propre et organisé.

2 ressorts de gâchette

1 extension en plastique du bouton Reset

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.