주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
스페인어

1 단계 번역 중

1 단계
If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD. Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame. Once you've gained enough clearance, peel the ambient light sensor off the LCD.
  • If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD.

  • Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame.

  • Once you've gained enough clearance, peel the ambient light sensor off the LCD.

  • Be careful not to crease the ambient light sensor below its top section, as the portion with adhesive applied may break off.

  • If necessary, attach the plastic view window to your new ambient light sensor before installation.

Si está reutilizando la pantalla LCD, no es necesario quitar el sensor de luz ambiental de la parte posterior de la pantalla LCD.

Utilice el borde de una herramienta de apertura de plástico para hacer palanca con cuidado la placa del sensor de luz ambiental del adhesivo que lo sujeta al marco de la pantalla.

Una vez que haya ganado espacio suficiente, retire el sensor de luz ambiental de la pantalla LCD.

Tenga cuidado de no arrugar el sensor de luz ambiental debajo de su sección superior, ya que la porción con adhesivo aplicado puede romperse.

Si es necesario, coloque la ventana de vista de plástico a su nuevo sensor de luz ambiental antes de la instalación.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.