주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

1 단계 번역 중

1 단계
If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD. Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame. Once you've gained enough clearance, peel the ambient light sensor off the LCD.
  • If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD.

  • Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame.

  • Once you've gained enough clearance, peel the ambient light sensor off the LCD.

  • Be careful not to crease the ambient light sensor below its top section, as the portion with adhesive applied may break off.

  • If necessary, attach the plastic view window to your new ambient light sensor before installation.

如果需要重复利用液晶显示屏,就没必要拆下黏在液晶显示屏背面的光线感应器。

用塑料撬棒的边缘小心撬起贴在屏幕支架上的光线感应器。

当有足够的缝隙时就把光线感应器从液晶显示屏上分离出来。

注意不要把光线感应器底部的胶条弄皱,因为使用的粘合剂可能会脱落。

必要时,在安装前将塑料固定片安装在新光线感应器上。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.