주요 콘텐츠로 건너뛰기

1 단계 번역 중

1 단계
During the display assembly removal process, it is highly likely that the metal clips around the perimeter of the of the display assembly will break.
  • During the display assembly removal process, it is highly likely that the metal clips around the perimeter of the of the display assembly will break.

  • To replace a broken clip, first remove the T5 Torx screw securing the broken base of the clip to the display assembly.

  • Place a new clip on the positioning pins molded into the display frame, and reinstall the T5 Torx screw to secure the two pieces together.

  • Repeat this process for any other broken clips around your display assembly.

在屏幕拆卸过程中,在屏幕周围的金属垫片极有可能会断裂。

要更换坏掉的垫片,首先拧掉把坏的垫片固定屏幕支架上的Torx T5 螺丝。

把新的垫片放置在屏幕支架内的定位销上,然后重新拧紧 Torx T5螺丝,将两个部件固定在一起。

重复以上步骤更换屏幕组件周围损坏的金属垫片。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.