주요 콘텐츠로 건너뛰기

11 단계 번역 중

11 단계
Apply thermal paste onto the main chip or on the connection side of the fan. Place the heat-sink over the GPU carefully, lining up any screws or clips.
Installing Heatsink
  • Apply thermal paste onto the main chip or on the connection side of the fan.

  • Place the heat-sink over the GPU carefully, lining up any screws or clips.

  • Apply heatsink on thermal pads as applicable.

  • Use only a small amount of heatsink and spread evenly using a card, or apply pressure evenly when connecting components.

  • If there is thermal tape or pads that were removed for the reflow, place these back in their original position.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.