주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Do not remove all the copper tape. Only remove the copper tape attached to the silver part of the motherboard. Release the copper tape located at the top middle of the phone with a plastic opening tool. This will take some force since the adhesive is rather strong. With the plastic opening tool, release the pop connector, by lifting up to release it. The pop connector should still be attached to the copper tape.
  • Do not remove all the copper tape. Only remove the copper tape attached to the silver part of the motherboard.

  • Release the copper tape located at the top middle of the phone with a plastic opening tool. This will take some force since the adhesive is rather strong.

  • With the plastic opening tool, release the pop connector, by lifting up to release it. The pop connector should still be attached to the copper tape.

  • Pull up gently on the copper tape and pop connector to remove the back camera. It should pop out easily.

コッパー(銅)テープを全て外さないでください。マザーボードのシルバーの部分に留められた箇所のみ外します。

電話の上部中央に留められたコッパーテープをプラスチックの開口ツールを使って外します。接着力が強いため、少し力が必要です。

続いて、プラスチックの開口ツールを使って、コネクターを持ち上げて接続を外します。コネクターはコッパーテープに留められたままにします。

コッパーテープとコネクターをゆっくりと上向きに引っ張り、バックカメラを取り出します。簡単に取り出せるはずです。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.