주요 콘텐츠로 건너뛰기

PowerBook G4 Aluminum 15" 1-1.5 GHz Upper Case Replacement

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 25 안내서에 영향을 미칩니다.

9 단계
PowerBook G4 Aluminum 15" 1-1.5 GHz Upper Case Replacement: 0 단계, 이미지 1개 중 1개
  • Place enough pressure on the upper case to allow you to slide a tool just within the seam between upper case and lower case as shown in the picture. A dentist's hook, push pin, or similar tool will work.

  • Do not yank the upper case off as soon as you free the clasp. The case is attached to the logic board via two ribbon cables.

  • Delicately slip the tip of your tool behind the silver metal latch and pull it forward while pulling up on the case. This may take some effort.

  • Alternatively, you can free the clasp with a small flathead screwdriver through the CD slot. The clasp is 1-3/16 in (3cm) from the left side of the slot. Use the screwdriver to lift out (or press back) the felt lining; then use the screwdriver to pull the clasp (shiny metal) forward to free it from the catch behind it (dull metal).

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.