메인 콘텐츠로 스킵하기
영어
이탈리아어
5 단계
Set your soldering iron to a medium to hot setting to adequately melt the solder joints Once the soldering iron is hot enough, touch the tip to the solder joint on the PCB while using tweezers to clear out a big enough hole to pull out the jack Remove the jack once the joints are broken and clean out excess solder
  • Set your soldering iron to a medium to hot setting to adequately melt the solder joints

  • Once the soldering iron is hot enough, touch the tip to the solder joint on the PCB while using tweezers to clear out a big enough hole to pull out the jack

  • Remove the jack once the joints are broken and clean out excess solder

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.