주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
스페인어
3 단계
Now it's time to begin working on removing the soft rubber hoses. They connect to the caliper, and then to the hard lines at a bracket on the car. You can see here where it connects to the caliper on the rear driver's side. It will be similar on all four calipers.
  • Now it's time to begin working on removing the soft rubber hoses.

  • They connect to the caliper, and then to the hard lines at a bracket on the car.

  • You can see here where it connects to the caliper on the rear driver's side. It will be similar on all four calipers.

  • This is how they connect to the two front hard lines. They are located near the top of the inside of the fender wells.

  • And this is how they connect to the rear hard lines. Soft line already disconnected in this picture. They are located just behind the fender well, accessible through an opening.

Ahora es el momento de comenzar a trabajar en la eliminación de las mangueras de goma blanda.

Se conectan a la pinza, y luego a las líneas duras en un soporte en el coche.

Puede ver aquí donde se conecta a la pinza en el lado del conductor trasero. Será similar en las cuatro pinzas.

Así es como se conectan a las dos líneas duras frontales. Están ubicados cerca de la parte superior del interior de los pozos del guardabarros.

Así es como se conectan a las dos líneas duras frontales. Están ubicados cerca de la parte superior del interior de los pozos del guardabarros.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.