주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

9 단계
In the occasion that the upper connection of the hose, where it connects to the hard line, is corroded to the extent where the 11mm nut rounds off while attempting to remove the line you may need to clamp the 11mm rounded off nut in a pair of locking pliers in order to get enough of a hold on it to break the lower 14mm nut on the soft line free. In this case you'll use the locking pliers to hold the 11mm nut while backing the soft line off of it. You may find that it is difficult to remove the hose in this way as the soft hose begins to twist. You will be working against the twisting motion of the hose this way. Since you are replacing the soft hose anyway, simply cut the hose with a suitable pair of wire cutters or a utility knife.
  • In the occasion that the upper connection of the hose, where it connects to the hard line, is corroded to the extent where the 11mm nut rounds off while attempting to remove the line you may need to clamp the 11mm rounded off nut in a pair of locking pliers in order to get enough of a hold on it to break the lower 14mm nut on the soft line free.

  • In this case you'll use the locking pliers to hold the 11mm nut while backing the soft line off of it.

  • You may find that it is difficult to remove the hose in this way as the soft hose begins to twist. You will be working against the twisting motion of the hose this way. Since you are replacing the soft hose anyway, simply cut the hose with a suitable pair of wire cutters or a utility knife.

Wenn der obere Anschluss zwischen Bremsschlauch und Bremsleitung stark korrodiert war, so dass die 11 mm Mutter beim Öffnen rund geworden ist, dann musst du die rund gewordene Mutter mit einer Gripzange anpacken. Halte sie gut fest und drehe die 14 mm Mutter am Bremsschlauch darunter auf.

In diesem Fall musst du die 11 mm Mutter festhalten und die Mutter am Bremsschlauch aufdrehen.

Wahrscheinlich ist der Schlauch mit dieser Methode nicht so leicht zu entfernen, weil er sich verdreht. Du musst gegen die Spannung des Schlauchs arbeiten. Da du ja den Schlauch sowieso austauschen willst, kannst du ihn auch einfach mit einem Seitenschneider oder einen scharfen Messer durchschneiden.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.