알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.
6 단계 번역 중
6 단계
-
Remove the following screws securing the upper assembly contact bracket to the rear case:
-
3.0 mm standoff screw
-
1.5 mm Phillips #000 screw
[* black] Remove the following screws securing the upper assembly contact bracket to the rear case: |
[* red] 3.0 mm standoff screw |
[* icon_note] Use a 2.5 mm flathead screwdriver for this screw. |
[* orange] 1.5 mm Phillips #000 screw |
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.