주요 콘텐츠로 건너뛰기

11 단계 번역 중

11 단계
Pull the logic board away from the rear-facing camera just enough to expose the gold contact cap under the top end of the board. Remove the gold-colored contact cap from the threaded post in the rear case, and set it aside. Remove the gold-colored contact cap from the threaded post in the rear case, and set it aside.
  • Pull the logic board away from the rear-facing camera just enough to expose the gold contact cap under the top end of the board.

  • Remove the gold-colored contact cap from the threaded post in the rear case, and set it aside.

Entferne das Logic Board weit genug von der Rückkamera, um die goldene Kontaktkappe unter dem oberen Endes des Boards freizulegen.

Entferne die goldene Kontaktkappe von dem Gewindestab im hinteren Gehäuse und lege es beiseite.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.