주요 콘텐츠로 건너뛰기

11 단계 번역 중

11 단계
Pull the logic board away from the rear-facing camera just enough to expose the gold contact cap under the top end of the board. Remove the gold-colored contact cap from the threaded post in the rear case, and set it aside. Remove the gold-colored contact cap from the threaded post in the rear case, and set it aside.
  • Pull the logic board away from the rear-facing camera just enough to expose the gold contact cap under the top end of the board.

  • Remove the gold-colored contact cap from the threaded post in the rear case, and set it aside.

ロジックボードの上部先端の下にあるゴールドの接続キャップが出てくるまで背面カメラからロジックボードをスライドします。

背面ケースのネジ付きポストからゴールドの接続キャップを取り出して、脇に置きます。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.