주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

12 단계 번역 중

12 단계
Thread the rubber/plastic stopper back onto the wires.
  • Thread the rubber/plastic stopper back onto the wires.

  • Do this AFTER you have applied solder to the tips of the wires.

  • To do this, I sprayed a bit of alcohol on the whole thing, and pulled the wires with the pliers. It required a pretty decent amount of force—but don't worry, the cables should hold without a problem. Just make sure you're pulling both at the same time.

  • Note that I've also added a tiny length of shrink-tube on the exposed wire.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.