주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 71개에 영향을 미칩니다.

영어
스페인어
4 단계
Carefully place a suction cup halfway up the heated side. Be sure the cup is completely flat on the screen to get a tight seal. While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.

  • If your iPad's screen is badly cracked, covering it with a smooth layer of clear packing tape may help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and fold it into a handle.

Coloca con cuidado una ventosa a la mitad del lado calentado.

Asegúrate de que la ventosa esté completamente plana en la pantalla para obtener un sello hermético.

Mientras mantienes presionado el iPad con una mano, tira de la ventosa para separar ligeramente el cristal del panel frontal de la carcasa trasera.

Si la pantalla de tu iPad está muy agrietada, cubrirla con una capa suave de cinta adhesiva transparente puede ayudar a que la ventosa se adhiera. Alternativamente, usa una cinta fuerte (como cinta adhesiva para conductos) y dóblala en un asa.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.