주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 52개에 영향을 미칩니다.

영어
프랑스어

21 단계 번역 중

21 단계
Leave the pick from the last step in place to prevent the adhesive from re-sealing. With a new pick, slice gently over the left-hand antenna, stopping before the home button. Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

Laissez le médiator utilisé dans la dernière étape en place pour éviter que l'adhésif ne ré-adhère.

Avec un nouveau médiator, faites le glisser en douceur du coté gauche de l'antenne vers le bouton "home".

Faites glisser le médiator uniquement de l'extérieur vers le centre de l'Ipad. Ne revenez pas en arrière, vous pourriez endommager l'antenne.

Si vous devez faire glisser le médiator une nouvelle fois, ré-insérer le à partir du coté gauche et faites le glisser vers la droite.

Laissez le médiator en place avant d'aller plus loin.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.