주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어
7 단계
Disconnect the ribbon wire from the optical drive by pressing down on the metal release tab and gently pulling the ribbon wire.  This should not require force. Disconnect the same ribbon wire from the motherboard; making sure you're pressing down on the metal release tab and gently pulling the ribbon wire.
  • Disconnect the ribbon wire from the optical drive by pressing down on the metal release tab and gently pulling the ribbon wire. This should not require force.

  • Disconnect the same ribbon wire from the motherboard; making sure you're pressing down on the metal release tab and gently pulling the ribbon wire.

Desconecte el cable de cinta de la unidad óptica presionando hacia abajo la lengüeta de liberación de metal y tire suavemente del cable de cinta. Esto no debe requerir fuerza.

Desconecte el mismo cable de cinta de la tarjeta madre; Asegurándose de que está presionando hacia abajo en la pestaña de liberación de metal y tirando suavemente del cable de cinta.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.