주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

영어
프랑스어
8 단계
Flip the computer back over and open the screen. The keyboard will now be loose. There is a ribbon cable connecting the keyboard to the computer, so do not pull it completely off to avoid tearing it. Gently pull towards the screen on both sides of the keyboard and slide it upwards. Set it upside down onto the mousepad area.
  • Flip the computer back over and open the screen. The keyboard will now be loose.

  • There is a ribbon cable connecting the keyboard to the computer, so do not pull it completely off to avoid tearing it.

  • Gently pull towards the screen on both sides of the keyboard and slide it upwards. Set it upside down onto the mousepad area.

  • Using the plastic opening tool, carefully pry between the black and white portion of the connection. It will pop out with moderate force.

  • Remove the keyboard.

Retournez l’ordinateur et ouvrez l’écran. Le clavier sera maintenant détaché.

Il y a un câble plat qui connecte le clavier à l’ordinateur, donc ne retirez pas complètement le clavier pour éviter de tirer sur le câble et de l’endommager.

Retournez doucement les deux côtés supérieurs du clavier. Posez-le à l’envers sur la zone du pavé tactile.

Avec un outil d’ouverture en plastique, tirez sans forcer la portion noire du clapet de retenue de la portion blanche du connecteur. Elle se séparera avec une force modérée.

Retirez le clavier.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.