주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
독일어

iPad Air Wi-Fi Kopfhörerbuchse Austausch

안내서 정보

= 완료 = 미완료
    Use this guide to replace the audio port in an iPad Air. [ … ] '''Warning:'''Be very careful when you isolate the battery isolation method in this guide is outdated, and may result using a battery blocker.''' The battery contacts are easily damaged, resulting in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. board. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.''' components.
    Use this guide to replace the audio port in an iPad Air. [ … ] '''Warning:'''Be very careful when you isolate the battery isolation method in this guide is outdated, and may result using a battery blocker.''' The battery contacts are easily damaged, resulting in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. board. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.''' components.

      작업중인 해당 device의 특정 부분 또는 부품을 설명하여 주십시오. 예: 배터리

      제목을 작성합니다.

      이 간략한 요약은 검색 결과에서만 볼 수 있습니다.

      독자가 안내서를 파고들기 전에 배경 정보를 알려주십시오.

      안내서 단계

      1 단계

      Löse den Verbinder der Frontkamera mit dem flachen Ende des Spudgers vom Logic Board.

      2 단계

      Hebe das Klebeband auf dem Flachbandkabel zur Kopfhörerbuchse nach oben, um so das Kabel herauslösen zu können.

      3 단계

      Hebe den Verbinder des Kopfhöreranschlusskabels mit dem flachen Ende des Spukgers aus seinem Sockel auf dem Logic Board.

      4 단계

      Schiebe das flache Ende des Spudgers unter das Kopfhöreranschlusskabel, um es so von der Klebeverbindung zum Rückgehäuse zu befreien.

      5 단계

      Schiebe den Spudger bis ans Ende des Kopfhöreranschlusskabels, um auch den letzten Kleber zu lösen.

      6 단계

      Drehe die 3,4 mm Kreuzschlitzschraube #000 von der Kopfhörerbuchse heraus.

      7 단계

      Benutze das Kopfhöreranschlusskabel, um ganz vorsichtig die Kopfhörerbuchse aus ihrem Sitz im Gehäuse zu entfernen.

      귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.