주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

6 단계
Display and camera cable connectors like this one sometimes have a small metal clip running around the back of the socket to lock them in place. To separate the connector, gently push the tip of a spudger under the clip. Then, swing the clip over to the other side of the socket, so that it lays flat against the cable. Holding the clip and cable together, gently pull in the direction of the cable to remove the connector from its socket.
Display Cable Connectors
  • Display and camera cable connectors like this one sometimes have a small metal clip running around the back of the socket to lock them in place.

  • To separate the connector, gently push the tip of a spudger under the clip. Then, swing the clip over to the other side of the socket, so that it lays flat against the cable.

  • Holding the clip and cable together, gently pull in the direction of the cable to remove the connector from its socket.

Display- und Kamerakabelverbinder wie dieser haben manchmal eine kleine Metallklammer um die Rückseite des Anschlusses, die sie festhält.

Um den Verbinder zu lösen, musst du vorsichtig eine Spudgerspitze unter die Klammer schieben. Klappe dann die Klammer auf die andere Seite des Anschlusses, so dass sie flach am Kabel anliegt.

Halte dann Klammer und Kabel zusammen und ziehe leicht in Richtung des Kabels, um den Verbinder aus seinem Anschluss zu entfernen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.