주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

영어
프랑스어
7 단계
In this mode, the multimeter sends a little current through one probe, and measures what (if anything) is received by the other probe. If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero—in this case, 0.8). Very low resistance is another way of saying that we have continuity.
  • In this mode, the multimeter sends a little current through one probe, and measures what (if anything) is received by the other probe.

  • If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero—in this case, 0.8). Very low resistance is another way of saying that we have continuity.

  • If no current is detected, it means there's no continuity. The screen will display 1 or OL (open loop).

Dans ce mode, le multimètre envoye un peu de courant à travers une sonde, et mesure ce qui est reçu par l'autre sonde.

Si les sondes sont connectées—soit par circuit continu, soit en se touchant l'une de l'autre directement—le courant test circule à travers. L'écran affiche une valeur zéro (ou proche de zéro— dans ce cas, 0,8). Une très faible résistance est une autre manière de dire que nous avons la continuité.

Si le courant n'est pas détecté, cela signifie qu'il n'y a pas de continuité. L'écran affichera 1 ou OL (circuit ouvert).

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.