주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

7 단계
In this mode, the multimeter sends a little current through one probe, and measures what (if anything) is received by the other probe. If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero—in this case, 0.8). Very low resistance is another way of saying that we have continuity.
  • In this mode, the multimeter sends a little current through one probe, and measures what (if anything) is received by the other probe.

  • If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero—in this case, 0.8). Very low resistance is another way of saying that we have continuity.

  • If no current is detected, it means there's no continuity. The screen will display 1 or OL (open loop).

このモードでは、マルチメーターは1つのプローブに少しの電流を送り、もう一方のプローブで何を(何かあれば)受信しているか計測します。

導通サーキットもしくは相互コンタクトでもプローブが接続されているならば、テスト電流は流れています。スクリーンでは0(もしくは限りなく0に近い値、0.8)の数値を指します。非常に低い抵抗があるということは言い換えれば電流が流れていると示します。

電流が探知できない場合は電流が流れていません。スクリーンでは1かOL(オープンループ)を指します。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.