주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
프랑스어

21 단계 번역 중

21 단계
On the right side, remove this screw in the front (#8-36, 5/8"), and the screw that looks like a shaft in the middle. These screws may have split washers on them. I suspect they were all supposed to have one, but only half of the screws in this step had them.
Remove the keyboard
  • On the right side, remove this screw in the front (#8-36, 5/8"), and the screw that looks like a shaft in the middle.

  • These screws may have split washers on them. I suspect they were all supposed to have one, but only half of the screws in this step had them.

  • That shaft-like screw is essentially a #8-36, 5/8" screw attached to a 1" head, 7/32" in diameter.

  • On the left side, remove this screw in the front (#8-36, 5/8") and the screw that looks like a shaft in the middle. This one is also #8-36, 5/8" but with a 1-1/2" x 7/32" head.

  • All these go into bag 3.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.