주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
스페인어

86 단계 번역 중

86 단계
The only thing now preventing the two frames from being separated is this gear. It is fixed to the shaft with a taper pin.
  • The only thing now preventing the two frames from being separated is this gear.

  • It is fixed to the shaft with a taper pin.

  • A taper pin is a pin that tapers from a wide end to a narrow end used to affix parts onto a shaft. The machinist would put the gear on the shaft, drill a hole, then taper the hole by using a tapering reamer. Then the machinist would put the taper pin in, give it a few gentle whacks with a hammer, and grind off any end sticking out too much.

  • Taper pins were better than set screws because a taper pin leaves no possibility for the parts to rotate.

  • They're also a pain to remove after 90 years.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.