주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

89 단계 번역 중

89 단계
Take the part over to the arbor press.
  • Take the part over to the arbor press.

  • You must support the part against something that will provide maximum surface area to the part, but also allow the taper pin to move at the bottom.

  • A piece of aluminum with a semicircular depression is perfect. You can do this either with a drill, then sawing off halfway through the diameter of the hole, or with an endmill of the right diameter.

  • Then cut a smaller notch the length of the depression to allow the pin to move. Again, this could be done with a drill and a saw, or an endmill.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.