주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

4 단계
Use a #1 Phillips to remove the two screws attaching the right side of the hard drive to the plastic framework. You'll need to angle the screwdriver down to get access to the lower right screw. Be sure to apply steady force to the screws and turn slowly so as not to strip them.
  • Use a #1 Phillips to remove the two screws attaching the right side of the hard drive to the plastic framework. You'll need to angle the screwdriver down to get access to the lower right screw. Be sure to apply steady force to the screws and turn slowly so as not to strip them.

Entferne die beiden Kreuzschlitzschrauben #1, mit denen die rechte Seite des Laufwerks am Kunststoffrahmen befestigt ist. Um an die untere rechte Schraube zu gelangen, musst du den Schraubendreher etwas schräg nach unten halten. Drücke fest und gleichmäßig auf die Schrauben, drehe sie langsam heraus, damit ihre Köpfe nicht rundgedreht werden.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.