주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

3 단계
Pull, but do not remove, the camera end of the motherboard up from the midframe to allow access to the connectors on the rear. Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.
  • Pull, but do not remove, the camera end of the motherboard up from the midframe to allow access to the connectors on the rear.

  • Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.

Hebe die Hauptplatine am Kameraende leicht vom Mittelrahmen weg - aber entferne sie nicht ganz - um an die Verbinder auf der Rückseite zu gelangen.

Versuche nicht die Platine ganz zu entfernen, da sie weiterhin mit dem Inneren des Mittelrahmens durch den Verbinder des Mikro USB Anschlusses der Seitenplatine zusammenhängt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.