주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board. Pull in the direction of the cable, parallel to the logic board. Do not pull up. Pull in the direction of the cable, parallel to the logic board. Do not pull up.
  • Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board.

  • Pull in the direction of the cable, parallel to the logic board. Do not pull up.

Fasse die schwarze Plastiklasche an und klappe den Sicherungsbügel am Stecker des Displaykabels hoch. Ziehe ihn dann gerade aus seinem Sockel auf dem Logic Board.

[* black] Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board.
[* black] Pull in the direction of the cable, parallel to the logic board. Do not pull up.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.