주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

6 단계
If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point. Use the hot iOpener to cover half of the two right-most battery cells.
  • If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.

  • Use the hot iOpener to cover half of the two right-most battery cells.

  • After about a minute, reheat the iOpener and move it to cover the other half of the right-most battery cells.

Wenn du keinen flüssigen Klebstoffentferner hast, verwende einen heißen iOpener, um einen Bereich des Klebers, mit dem der Akku ins obere Gehäuse eingeklebt ist, zu erwärmen und dadurch weicher zu machen. Anschließend kannst du dann an diesem Bereich den Hebel ansetzen.

Mit dem heißen iOpener kannst du die eine Hälfte der beiden am weitesten rechts gelegenen Akkuzellen bedecken.

Nach etwa einer Minute kannst du dann den iOpener erneut erhitzen und ihn über die andere Hälfte der beiden am weitesten rechts gelegenen Akkuzellen legen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.