주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

영어
프랑스어
6 단계
If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point. Use the hot iOpener to cover half of the two right-most battery cells.
  • If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.

  • Use the hot iOpener to cover half of the two right-most battery cells.

  • After about a minute, reheat the iOpener and move it to cover the other half of the right-most battery cells.

Si vous n'avez pas de dissolvant liquide, utilisez un iOpener chaud pour chauffer et ramollir l'adhésif fixant la batterie au boîtier supérieur, puis faites délicatement levier à cet endroit.

Recouvrez la moitié des deux cellules de batterie de droite avec l'iOpener chaud.

Au bout d'une minute, refaites chauffer l'iOpener et déposez-le sur l'autre moitié des cellules de batterie de droite.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.