주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

영어
프랑스어
9 단계
Repeat this procedure with the adjacent battery cell: Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive. Alternatively, re-heat this section with your iOpener if needed.
  • Repeat this procedure with the adjacent battery cell:

  • Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.

  • Alternatively, re-heat this section with your iOpener if needed.

  • Push a plastic card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive.

Répétez la procédure pour décoller la cellule adjacente :

Appliquez une petite quantité de dissolvant liquide sous la cellule de la batterie et attendez 2 à 3 minutes qu'il pénètre et que l'adhésif ramollisse.

Ou bien refaites chauffer la zone avec votre iOpener, si nécessaire.

Insérez une carte en plastique sur environ 2,5 cm de long entre la cellule de batterie et le boîtier supérieur, et faites lentement levier pour les décoller de l'adhésif.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.