주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

영어
프랑스어
8 단계
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Flip the power supply over to access the DC power cable connection behind the logic board.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Flip the power supply over to access the DC power cable connection behind the logic board.

  • Squeeze the tab on the back side of the DC power cable connector and pull it straight out of its socket on the back of the logic board.

Veillez à ne pas toucher les fils des condensateurs ni les soudures exposées à l'arrière de la carte d'alimentation. Tenez toujours la carte par les côtés.

Basculez le haut de la carte d'alimentation vers vous afin d'accéder au connecteur du câble d'alimentation CC derrière la carte mère.

Pincez la patte du connecteur du câble d'alimentation CC et débranchez ce dernier de sa prise à l'arrière de la carte mère en le tenant bien droit.

[* icon_caution] ***Be very careful*** not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
-[* icon_note] Flip the top of the power supply towards you to access the DC power cable connection behind the logic board.
-[* black] Squeeze the DC power cable connector tab and pull it straight out of its socket on the back of the logic board.
+[* icon_note] Flip the power supply over to access the DC power cable connection behind the logic board.
+[* black] Squeeze the tab on the back side of the DC power cable connector and pull it straight out of its socket on the back of the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.