주요 콘텐츠로 건너뛰기

Disassembling Canon PowerShot SX200 IS

2 단계
Disassembling Canon PowerShot SX200 IS: 0 단계, 이미지 2개 중 1개 Disassembling Canon PowerShot SX200 IS: 0 단계, 이미지 2개 중 2개
  • Remove a black screw from under that battery compartment cover.

  • Remove two silver screws from under the A/V connector cover.

  • Remove the silver right hand end.

  • Remove the case back.

  • (On reassembly, just before replacing the rear cover is a great time to clean the fingermarks off the LCD and the inside of the rear cover window.)

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.