주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
독일어

iPad 3 4G Klebestreifen ersetzen

안내서 전제 조건

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

iPad 2 Wi-Fi EMC 2415 Home Button Austausch

iPad 2 Wi-Fi EMC 2415 Front Panel Klebestreifen ersetzen

iPad 2 Wi-Fi EMC 2560 Front Panel Klebestreifen ersetzen

안내서 정보

= 완료 = 미완료
Adhesive Strips (Existing Panel) Strips
Adhesive Strips (Existing Panel) Strips
    replace the adhesive strips and re-seal on your iPad 3 after 4G to seal the deal on a repair. repair job well done. [ … ] '''Only for use with EXISTINGBefore you begin peeling and sticking tape, it's important to have clean adhesion surfaces on both the front panel assemblies.''' and the rear case. Use a spudger to scrape off any large excess bits of original adhesive, then clean all of the gluing surfaces with a paper towel and rubbing alcohol or Goof Off. [ ] It is recommended that you peel each adhesive strip as needed, rather than lay them out all at once.
    replace the adhesive strips and re-seal on your iPad 3 after 4G to seal the deal on a repair. repair job well done. [ … ] '''Only for use with EXISTINGBefore you begin peeling and sticking tape, it's important to have clean adhesion surfaces on both the front panel assemblies.''' and the rear case. Use a spudger to scrape off any large excess bits of original adhesive, then clean all of the gluing surfaces with a paper towel and rubbing alcohol or Goof Off. [ ] It is recommended that you peel each adhesive strip as needed, rather than lay them out all at once.

      작업중인 해당 device의 특정 부분 또는 부품을 설명하여 주십시오. 예: 배터리

      제목을 작성합니다.

      이 간략한 요약은 검색 결과에서만 볼 수 있습니다.

      독자가 안내서를 파고들기 전에 배경 정보를 알려주십시오.

      안내서 단계

      귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.