주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 10개에 영향을 미칩니다.

영어
이탈리아어
4 단계
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. Make a battery blocker using a playing card and slide it underneath the logic board connector to disconnect the battery. You can also use an iFixit battery blocker. Be very careful and don't push the battery blocker underneath the connector with excessive force.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • Make a battery blocker using a playing card and slide it underneath the logic board connector to disconnect the battery.

  • You can also use an iFixit battery blocker. Be very careful and don't push the battery blocker underneath the connector with excessive force.

  • Leave the blocker there to prevent the battery connector leads from making contact until you have completed your repairs.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.