주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

6 단계
Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board. Push the cable slightly to the right to clear it for the removal of the logic board. Push the cable slightly to the right to clear it for the removal of the logic board.
  • Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board.

  • Push the cable slightly to the right to clear it for the removal of the logic board.

Hebele den Verbinder des Kabels zur Kopfhörerbuchse mit dem flachen Ende des Spudgers aus seinem Sockel auf dem Logic Board.

Schiebe das Kabel leicht nach rechts, damit es beim Entfernen des Logic Boards nicht stört.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.