주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

영어
프랑스어

1 단계 번역 중

1 단계
Use a spudger to loosen the right speaker cable's connector from its socket on the logic board. It is useful to push downward on both short sides of the connector to walk it out of its socket. Be careful with the corners of the connectors, as they can be easily broken off.
  • Use a spudger to loosen the right speaker cable's connector from its socket on the logic board.

  • It is useful to push downward on both short sides of the connector to walk it out of its socket. Be careful with the corners of the connectors, as they can be easily broken off.

  • Pull the connector downwards to remove it from its socket.

À l'aide d'un spudger, dégagez le connecteur du bouton de mise sous tension de sa prise sur la carte mère.

Il convient d'appliquer l'effet de levier sur les deux côtés courts du connecteur. Faites attention aux angles des connecteurs, car ils peuvent se casser facilement.

Tirez le connecteur vers le bas pour le débrancher de sa prise.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.