주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 18개에 영향을 미칩니다.

11 단계 번역 중

11 단계
In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. While still supporting the front panel, use a fingernail or the edge of an opening tool to disconnect the front-facing camera and earpiece speaker connector.
  • In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • While still supporting the front panel, use a fingernail or the edge of an opening tool to disconnect the front-facing camera and earpiece speaker connector.

次の4つの手順ではケーブルコネクターのみこじ開けます。基板上のケーブルコネクター用ソケットには接触しないでください。

フロントパネルを90度で固定したまま、プラスチックの開口ツールを使って、正面カメラと前面側マイクのケーブルコネクターの接続を外します。

[* icon_caution] In the next four steps, take care to pry up '''only''' on the cable connectors, and not on their sockets on the logic board.
[* black] While still supporting the front panel, use a plasticfingernail or the edge of an opening tool to disconnect the front-facing camera and earpiece speaker cable connector.
[* black] While still supporting the front panel, use a plasticfingernail or the edge of an opening tool to disconnect the front-facing camera and earpiece speaker cable connector.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.