주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

영어
프랑스어

1 단계 번역 중

1 단계
Remove two T6 Torx screws from each side of the hard drive (four screws total). You'll need to transfer these screws to your new hard drive if you're changing drives.
  • Remove two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If desired, peel the pull tab off your old hard drive and transfer it to the side of your new drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running. Many recent Macs may be able to use OS X Internet Recovery.

Retirez les deux vis Torx T6 de chaque côté du disque dur (quatre vis au total).

Vous devrez transférer ces vis sur votre nouveau disque dur si vous changez de disque.

Réutilisez ces vis sur le nouveau SSD.

Si vous installez un nouveau disque dur, nous disposons d'un tutoriel d'installation OS X pour vous aider à le mettre en service. De nombreux Mac récents peuvent utiliser la fonctionnalité de récupération d'OS X.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.