주요 콘텐츠로 건너뛰기

Reemplazo del ensamblaje del cable del botón de encendido del iPhone 6

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
스페인어

18 단계 번역중

18 단계
iPhone 6 Power Button Cable Assembly Replacement: 0 단계, 이미지 3개 중 1개 iPhone 6 Power Button Cable Assembly Replacement: 0 단계, 이미지 3개 중 2개 iPhone 6 Power Button Cable Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Begin to peel the flash/microphone/power button assembly cable up from the rear case starting from the connector end.

  • Continue to peel the cable up, being particularly careful of the narrow component ends of the cable.

  • Remove the flash/microphone/power button assembly cable from the phone.

Comienza a despegar el cable del flash/micrófono/botón de encendido, hacia arriba de la carcasa trasera, comenzando desde el extremo del conector.

Continúa despegando el cable, teniendo especial cuidado con los extremos del componente estrecho del cable.

Retira el cable de ensamblaje del flash/micrófono/botón de encendido, del teléfono.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.